Installation Steps; Care And Cleaning - AVS Bugflector Instrucciones De Instalación

Installation Steps

3
Fender Protector
Installation
4
Align fender protector with front edge of fender. With the fender
protector in final position, remove the remainder of the tape liner by
pulling on loose ends. Press firmly on flanges to ensure adhesion.
6

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International, Inc. We take the utmost pride in our
products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in
terms of fit, durability, finish and ease of installation.
Auto Ventshade
NOTE: Actual application may vary slightly from illustrations.
Using a phillips screwdriver, install the fastener
Clean the fender protector mounting
location with an alcohol pad.
Lund International, Ventshade Accessories Division
655 Raco Drive, Lawrenceville, GA 30045
800-241-7219 • Fax 770-339-5839 • Visit us at lundinternational.com
© 2005 Lund International, Inc. All rights reserved.
, the Auto Ventshade logo and the AVS
TM TM
DO NOT OVERTIGHTEN
Expose 2" (5 cm) of tape liner from each end of the flanges
5
Apply bump on as indicated.
7
Repeat Steps 4-7 for passenger side fender protector.
logo are trademarks of Lund International, Inc.
TM
Page 2 of 2
front grill
fastener
on the fender protector.
hood shield