Installation Of Ceiling Cover - Emerson ASHLAND CF717BS01 El Manual Del Propietario

9.1
Remove the left screw and lockwasher from each side of
the hanger bracket (Figure 18) and loosen the other two
NOTE: When installing the ceiling fan using the close-
screws.
to-the-ceiling method, carefully lift the fan assembly
from the hook on the hanger bracket and proceed as
follows.
9.2
Lift the ceiling cover up to the hanger bracket. Engage the
slots in the ceiling cover with the loosened screws in the
bracket and turn the cover counterclockwise (Figure 19).
Be sure that the lockwashers are between the screw
heads and the ceiling cover.
Install the other two screws and lockwashers; tighten all
screws securely
WARNING
!
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the ceiling cover and the ceiling.

9. Installation of Ceiling Cover

Figure 18
Figure 19
Please contact 1-800-654-3545 for further assistance
13
LOOSEN
THIS SCREW
REMOVE THIS
SCREW AND
LOCKWASHER
INSTALL SCREW TIGHTEN
AND WASHER SCREW
emersonfans.com
ETL Model No.: CF717-1
CEILING
COVER