Emerson ASHLAND CF717BS01 El Manual Del Propietario página 16

11. Installation of Light Fitter to Switch Housing
11.3
Rotate the switch housing and align the light kit fitter plate
to line up the fan speed control pull chain switch for ease of
pull chain assembly.
Remove the rubber band and plastic from around the
switch housing pull chain for ease of assembly.
Position the fan speed control switch pull chain through the
light fitter bushing hole of the light kit fitter plate (Figure 25).
Install the split lockwasher and 9/16" hex jam nut (supplied
in the parts bag) onto the light fitter/switch housing
assembly and tighten securely (Figure 25).
11.4
Engage the harness white wire connector to the light fitter
white wire connector until you hear a snap to secure the
connectors (Figure 26).
Figure 25
Figure 26
16
(Continued)
9/16" HEX JAM NUT
SPLIT LOCKWASHER
SWITCH
HOUSING
ROTATE AND ALIGN
SWITCH HOUSING FAN
PULL CHAIN
LIGHT FITTER
LIGHT FITTER BUSHING
HARNESS WHITE
WIRE CONNECTOR
LIGHT FITTER
WHITE WIRE
CONNECTOR
ETL Model No.: CF717-1