Installation Of Ceiling Fan Blades - Emerson ASHLAND CF717BS01 El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. Installation of Ceiling Fan Blades

10.1
Remove and discard the five motor hub spacers to free the
motor for installation of ceiling fan blades (Figure 20).
10.2
Mount the blade flanges to the fan blades using three
#8-32 x 8mm washer head screws (supplied) per blade
(Figure 21).
Repeat this procedure for remaining four fan blades and
blade flanges.
WARNING
!
To reduce the risk of personal injury, do not bend the
blade flanges when installing the flanges, balancing the
blades, or cleaning the fan. Do not insert foreign objects
between rotating fan blades.
10.3
Rotate the motor hub to expose the motor flange holes
through the switch housing plate.
Attach a blade/flange assembly to the motor hub using two
1/4-20 x 1/2" oval head screws (supplied) (Figure 22).
Do not tighten completely at this time.
Install remaining blade assemblies in the same way.
Gently snug all flange screws to the motor hub, working
NOTE: Take care not to scratch fan housing assembly
around the hub in a clockwise sequence.
when installing blades.
Figure 20
Figure 21
1/4-20 x 1/2" OVAL HEAD
SCREWS (2 per blade /
flange assembly)
Figure 22
14
MOTOR HUB
MOTOR HUB
SPACERS (5)
#8-32 x 8mm
WASHER
HEAD SCREW
(3 per blade)
FAN BLADE (5)
BLADE FLANGE (5)
BLADE / FLANGE
ASSEMBY (5)
SWITCH HOUSING
PLATE
ETL Model No.: CF717-1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Ashland cf717orb01Ashland cf717sw01

Tabla de contenido