MBM FTBE74A Manual De Uso E Instalación página 37

operations described in "Deactivation".
DEACTIVATION
Before proceeding see chapters 5
Humidity residue deposited on
the hotplate/s can damage the
appliance and cause the hotpla-
te/s to wear quickly.
In order to eliminate all humidity
residue on the hotplates thus
avoiding quick wear, once routine
cleaning has been finished, turn the
appliance on for approximately 10'.
Wait for the temperature of the hotpla-
te to cool off so that the operator is
not burnt.
Check to make sure the drain piping
has no obstructions (Fig.3).
THE PRESENT MANUAL IS PROPERTY OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
INSTRUCTIONS FOR USE
Use a standard sprayer to apply the
liquid detergent on the whole surface
of the hob and, using a non-abrasive
sponge, clean the entire surface tho-
roughly by hand.
The capacity of the container collecting
drained material is limited. Check it
frequently so that it does not spill over
(Fig. 4).
Fill the recipient 3/4 to handle it
safely. Once the recipient has rea-
ched 3/4 its capacity, remove it
from its seat, empty it and put it back in
place.
Empty the container in complian-
ce with waste disposal procedu-
res in force in the country where
the appliance is used and reposition
the emptied recipient in its housing.
- 15 -
7.
EN