Care & Cleaning; Technical Information; Warranty Information - LUCCI Air AIRFUSION AKMANI Instrucciones De Instalación

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 32
Airfusion Akmani Installation Instructions
instruction on how to use the balancing kit. The balancing kit can be used to assist re-balancing should the ceiling fan
become un-balanced again. Store your balancing kit away after installation for future use if required.
NOISE:
When it is quiet (especially at night) you may hear occasional small noises. Slight power fluctuations and frequency
signals superimposed in the electricity for off-peak hot water control, may cause a change in fan motor noise.
This is normal. Please allow a 24-hour "settling-in" period, most noises associated with a new fan disappear during this
time.
The manufacturer's warranty covers actual faults that may develop and NOT minor complaints such as hearing the
motor run – All electric motors are audible to some extent.
Periodic cleaning of your ceiling fan is the only maintenance required. Use a soft brush or lint free cloth to avoid
scratching the paint finish. Please turn off electricity power when you do so.
Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility
of an electrical shock.
The motor has a permanently lubricated ball bearing. There is no need to oil.
NOTE: Always turn off the power at the mains switch before attempting to clean your fan.
AIRFUSION
AKMANI SERIES
DC FAN models
60" blade fan only
IN AUSTRALIA / NEW ZEALAND – Please refer to the separated WARRANTY STATEMENT.
IN EUROPE – If you are a European customer please contact the retail outlet where the fan was purchase for
warranty service.
10 | P a g e
CARE & CLEANING

TECHNICAL INFORMATION

Rated power
Rated Voltage
220-240 V AC

WARRANTY INFORMATION

Battery for remote
(motor)
36 W
1 x 12 V 23AE

Publicidad

Tabla de contenido
loading

Tabla de contenido