NOTE: The user can change the temperature unit from C to F using the settings menu.
9. Cleaning Methods
In Tank
Basket Cleaning: Place parts to be cleaned into the basket or use cassettes.
the basket directly into the main tank containing BioSonic General Purpose, Germicidal, or
Enzymatic Cleaner. Follow dosage instructions per cleaning solution label.
In Beaker
For specialized item cleaning (e.g. prostheses, burs): Place items into a beaker and add desired
cleaning solution (e.g. BioSonic Cement Remover or BioSonic General Purpose) according to the
product directions. Suspend the beaker in the tank by using the beaker holder and place the
beaker positioning ring around the beaker so that the bottom 2/3
bath.
NOTE: Beaker holder is to be used in conjunction with the basket
removing basket if beakers are left in place.
10. Accessory Use
• CASSETTE BASKET: The UC150 basket cleans large volumes of instruments and increases
instrument processing efficiency.
Place items in an instrument cassette or directly at the bottom of the basket. Place basket in
tank and clean for desired time. After cleaning, rinse the basket and instruments thoroughly
under running water.
00 vector graphics: logo and buttons
• BEAKER HOLDER: The beaker holder holds a 600ml glass beaker to clean small parts, burs,
prostheses.
Place the Beaker Holder on the basket and insert the basket into the tank. Place positioning
rings around the beaker so that the bottom 2/3 of the beaker is suspended in the main bath.
Clean for desired time.
11. Data Log
• VIEW LOG: Select
01-logo-loading
02-logo-information
04-A-button-program-light
04-B-button-program-light-feedback
05-A-button-program-regular
05-B-button-program-regular-feedback
06-A-button-program-heavy
06-B-button-program-heavy-feedback
07-A-button-program-my
07-B-button-program-my-feedback
11-A-button-settings
11-B-button-settings-feedback
08-A-button-log
(Figure 12)
from main menu
08-B-button-log-feedback
is suspended in the main
rd
(Figure
03-product-name
09-1-A-button-heater- rst
09-2-A-button-heater-after-code
09-B-button-heater-feedback
10-A-button-solution-degas
10-B-button-solution-degas-feedback
12-A-button-language-measurest
12-B-button-language-measures-feedback
13-A-button-date-time
13-B-button-date-time-feedback
14-A-button-my-setup
14-B-button-my-setup-feedback
15-A-button-information
15-B-button-information-feedback
16-A-button-degas
to view cleaner data log.
16-B-button-degas-feedback
(Figure 8)
Then place
7). Use caution when
CB
M 1:1
20.10.2016
11