Maintenance - Coltene BioSonic UC150 Guia Del Usuario

• DATA DOWNLOAD: Insert a USB stick in the USB port provided on the left of the UC150 device
display. To download cleaner use data onto the USB device, press
confirm data download. Monthly data log files will be available in .csv format on the USB file.

12. Maintenance

Cleaning
All components should be cleaned each day by wiping with a soft cloth moistened with a
commercially available mineral deposit remover followed by cleaning with isopropyl alcohol or a
mild disinfectant.
Do not use petroleum based solvents, iodophors or phenolic based products.
Iodophors and phenolics can stain the surface of the unit. Clean up all liquid spills
immediately. Rust deposits on tank can be cleaned/ removed with a commercially
CAUTION!
available stainless steel cleaner.
Stainless Steel Cleaning
 Allowable:
• Wash with a clean cloth or rag soaked with warm water and mild soap or liquid dish detergent.
• Always clean in the direction of the original polish lines.
• Always rinse well with clear water (2 or 3 times) after cleaning. Wipe dry completely.
• Specialized household stainless steel cleaner may also be used.
 Avoid:
• Do not let dirt accumulate.
• Steel or stainless steel wool or scrapers to remove stubborn debris.
• Harsh or abrasive cleaners.
• Chemicals harmful to stainless steel not limited to but including products that contain chloride,
fluoride, iodide or bromide.
• Cleaners that contain bleach.
In case of questions regarding compatibility of decontamination or cleaning agents please contact
the manufacturer or your supplier.
Inspecting the Power Cord Periodically
Check the power cord for damage and see that the connectors at both ends of the cord are fully
seated.
Changing the Fuse
• Remove the power cord from the wall outlet first and then from the power cord receptacle on
12
33-temperature-small
34-program-light
00 vector graphics: single-icons and screen buttons
35-program-regular
36-program-heavy 30-settings
37-program-my
31-temperature-large
32-temperature-medium
38-timer-medium
33-temperature-small
39-timer-large
34-program-light
40-solution
41-degas
35-program-regular
36-program-heavy
hot surface
37-program-my
38-timer-medium
39-timer-large
40-solution
41-degas
hot surface
45-lid-is-open
46-lid-was-open
47-repair
48-software-update
42-log
50-A-button-standby
43-information
50-B-button-standby-feedback
44-close-lid
51-statusbar-standby-closed
52-statusbar-standby-opened
45-lid-is-open
60-attention
46-lid-was-open
61-instructions
47-repair
62-A-button-ok
62-B-button-ok-feedback
48-software-update
warning/caution
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
62-A-button-ok
62-B-button-ok-feedback
warning/caution
22-A-button-home
22-B-button-home-feedback
23-A-button-back
23-B-button-back-feedback
key. Press 24-A-button-download key to
24-B-button-download-feedback
25-A-button-play
25-B-button-play-feedback
26-A-button-pause
26-B-button-pause-feedback
20.10.2016
20-A-button-c
20-B-button-c
21-A-button-s
21-B-button-s
22-A-button-h
22-B-button-h
23-A-button-b
23-B-button-b
CB
M 1:1
24-A-button-d
24-B-button-d
25-A-button-p
25-B-button-p
26-A-button-p
26-B-button-p