填充说明 - Coltene BioSonic UC150 Guia Del Usuario

12.02.2016 10:21
SET DATE / TIME
04 NOV
05 DEC
06 JAN
07 FEB
08 MAR
09 APR
10 MAY
DD.MM.YYYY MM.DD.YY
图3 设置屏幕：日期和时间
• 设置完成。一旦以您选择的语言设置完成，显示屏将显示主屏幕。您的UC150现已设置并
可使用了！
注：如果需要对主机的设置进行修改，请按
6. 填充说明
• 确保排水手柄（图5）逆时针完全旋转到关闭位置。用温水注入主机至填充线指示器
（图6）。确保水位达到最低水位线，且在使用附件如烧杯或篮子等时不超过最高水位
线。
• 往水箱中倒入必需量的超声波清洗液（例如 BioSonic 通用 UC30、BioSonic酶超声波清洗
剂UC32）和水。
• 每天更换水箱中的溶液或在显示肮脏或变色时提早更换。当使用烧杯时，每次使用后更换
烧杯中的溶液。
• 通过顺时针完全旋转排水手柄到"打开"位置，并让溶液排入水槽或废液系统中，将主机排
空。冲洗水箱，并逆时针旋转排水手柄到"关闭"位置。切勿通过手动丢弃溶液排空水箱，
否则可导致主机停止正常工作。
注：切勿在没有溶液的情况下操作本机。水箱干燥情况下操作将使保修失效。不要将物品直
接放在水箱底部。务必使用附件篮、盒架或烧杯。
7. 脱气
00 vector graphics: logo and buttons
01-logo-loading
02-logo-information
对溶液脱气从而除去干扰清洗过程的较大气泡，且是每次给水箱添加新溶液时所必需的。
• 按主屏幕上的DEGAS图标
00 vector graphics: single-icons and screen buttons
04-A-button-program-light
04-B-button-program-light-feedback
05-A-button-program-regular
• 选择溶液类型以记录使用的溶液或仅脱气并按 30-settings
05-B-button-program-regular-feedback
06-A-button-program-heavy
31-temperature-large
06-B-button-program-heavy-feedback
260
32-temperature-medium
07-A-button-program-my
07-B-button-program-my-feedback
40°C
2013 08 59
2014 09 00
2015 10 01
AM
2016 11 02
2017 12 03 PM
2018 01 04
2019 02 05
YYYY.MM.DD 12Hr 24Hr
。
42-log
43-information
44-close-lid
00 vector graphics: single-icons and screen buttons
• 设置日期和时间：使用下拉列表和格式按
30-settings 钮设置首选格式的日期和时间。按
受。用户可以选择以下三种日期格式之一：
31-temperature-large
00 vector graphics: logo and buttons
- 日.月.年
32-temperature-medium
- 月/日/年
33-temperature-small
- 年-月-日
34-program-light
35-program-regular
04-A-button-program-light
04-B-button-program-light-feedback
36-program-heavy
05-A-button-program-regular
05-B-button-program-regular-feedback
37-program-my
06-A-button-program-heavy
38-timer-medium
06-B-button-program-heavy-feedback
39-timer-large
07-A-button-program-my
07-B-button-program-my-feedback
40-solution
进入设置菜单以更改设置选项。
11-A-button-settings
11-B-button-settings-feedback
41-degas
08-A-button-log
08-B-button-log-feedback
hot surface
03-product-name
09-1-A-button-heater- rst
09-2-A-button-heater-after-code
09-B-button-heater-feedback
10-A-button-solution-degas
10-B-button-solution-degas-feedback
12-A-button-language-measurest
12-B-button-language-measures-feedback 进行脱气。
13-A-button-date-time
13-B-button-date-time-feedback
14-A-button-my-setup
14-B-button-my-setup-feedback
42-log
43-information
44-close-lid
45-lid-is-open
01-logo-loading
46-lid-was-open
02-logo-information
47-repair
48-software-update
50-A-button-standby
50-B-button-standby-feedback
51-statusbar-standby-closed
52-statusbar-standby-opened
60-attention
61-instructions
62-A-button-ok
62-B-button-ok-feedback
warning/caution
20-A-button-checked
20-B-button-checked-feedback
21-A-button-save
21-B-button-save-feedback
按钮接
20-A-button-c
20-B-button-c
21-A-button-s
21-B-button-s
03-product-name
22-A-button-h
22-B-button-h
09-1-A-button-heater- rst
09-2-A-button-heater-after-code
23-A-button-b
09-B-button-heater-feedback
23-B-button-b
10-A-button-solution-degas
10-B-button-solution-degas-feedback
24-A-button-d
12-A-button-language-measurest
24-B-button-d
12-B-button-language-measures-feedbac
25-A-button-p
13-A-button-date-time
25-B-button-p
13-B-button-date-time-feedback
14-A-button-my-setup
26-A-button-p
14-B-button-my-setup-feedback
26-B-button-p
15-A-button-information
15-B-button-information-feedback
CB
16-A-button-degas
M 1:1
16-B-button-degas-feedback
25.10.2016
M 1:
20.10.201