Wayne Dalton TorqueMaster Plus 9100 Instrucciones De Instalación Y Manual Del Propietario página 29

25
Attaching Disconnect Cables
Tools Needed:
NOTE: See idrive
instructions and owner's manual for
Pliers
idrive
® parts.
Attach the loose disconnect cable
(located in opener hardware bag) to the
opener with the "S" hook. Close both
ends of the "S" hook (with pliers) to lock
assembly together.
Thread the disconnect cable (behind the
counterbalance cable) through the hole
in the right hand end bracket; remove
all slack between opener and right end
bracket.
26
Mounting Disconnect
Handle Bracket
Tools Needed:
NOTE: See idrive
Pencil
instructions and owner's manual for
idrive
parts.
®
Tape measure
1/8" Drill Bit
Mark a location on the right jamb, 6
feet above the floor to mount the
7/16" Socket
disconnect handle bracket.
Driver
Power Drill
Drill 1/8" pilot holes for the lag screws.
Align top of the bracket with the mark.
Fasten bracket to the jamb with
(2) 1/4" x 1-1/2" lag screws.
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com
main installation
®
RIGHT SIDE OF
END BRACKET
main installation
®
S-HOOK
DISCONNECT
CABLE
HOLE IN
END BRACKET
WARNING
Rachet Bracket is under
EXTREME SPRING TENSION. ENGAGED SIDE VIEW
fatal injury, DO NOT remove To avoid possible severe or
fasteners from ratchet bracket
until spring(s) are fully wnwound.
To safely unwind spring(s) read Cable Drum
ENGAGED UNDERNEATH VIEW and follow the directions in the
installation instructions/owners manual. Ratchet Pawl No space between Ratchet
DO NOT REMOVE THIS TAG. Pawl and Cable Drum indicates engagement
No space between
Cable Drum Ratchet Pawl and
DISENGAGED SIDE VIEW
DISENGAGED UNDERNEATH VIEW
Ratchet Pawl Space between Ratchet Pawl
and Cable Drum non-indicates engagement
No space between Ratchet Pawl and
UPPER POSITION Cable Drum LOWER POSITION
Ratchet Pawl in Upper Position Ratchet Pawl in Lower Position
UPPER POSITION SIDE VIEW
6ft 6ft
HOLE IN RIGHT
END BRACKET
this Use these
label. Illustr ation, W A
in conju R N
Rac nction with IN G
EXT het Bra the Instru
To REM ENGAG E SPR cke t is ctions
fata avo id TEN SIDE SIO ED VIEW ING und er on
fast ene l inju ry, pos sibl N.
unti rs from DO e sev NO ere
To l spri ng(s ratc het T rem or
ENGAG ED safe ly unw wnw oun ) are brac ove
UNDER and follo NEATH ind d. fully ket
inst alla VIEW w the read spri
DO tion inst dire ctio ng(s )
NO T REM man Ratchet ruct ions ns in
ual. OVE Pawl /ow ners the
space No Ratchet betwee THI
Cable Pawl Drum n and S TAG space No Pawl
DISENG indicate
AGED SIDE
VIEW
DISENG AGED
UNDER NEATH
VIEW
No Ratchet Pawl
Ratchet space betwee
UPPER Cable POSITI Pawl Drum n and Space
ON non-ind
LOWER
POSITI
Ratchet Pawl
in Upper Position
UPPER Ratchet
POSITI ON Pawl
SIDE VIEW
CLOSE "S" HOOK LOWER POSITI
ON SIDE
(2) 1/4" X 1-1/2"
LAG SCREWS
DISCONNECT
HANDLE BRACKET
29
the other
side of
Cable
Drum
betwee
and . Drum n Ratchet Cable
s engage ment
Cable
Drum
betwee
Cable and n Ratchet Pawl
icates Drum engage
ment
ON
in Lower
Position
VIEW