Pull Rope - Wayne Dalton TorqueMaster Plus 9100 Instrucciones De Instalación Y Manual Del Propietario

D

Pull Rope

WARNING
Tools Needed:
DO NOT INSTALL PULL ROPES
Power Drill
ON DOORS WITH ELECTRIC
NO. 6 SCEW EYE
1/8" Drill Bit
OPERATORS. CHILDREN MAY
BECOME ENTANGLED IN THE
ROPE CAUSING SEVERE OR
FATAL INJURY.
Measure and mark the jamb
approximately 48" to 50" (1220 to 1270
mm) from floor on the right or left side
PULL ROPE
of jamb. Drill 1/8" pilot hole for No. 6
screw eye. Tie the pull rope to the No.
6 screw eye and to the bottom bracket
as shown.
BOTTOM BRACKET
PULL ROPE
41
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.Wayne-Dalton.com