Work Position; Zero Position; Articulated And Multi-Articulated Headrest (Optional); Swivel Armrest (Optional) - Olsen SPRINT Manual De Operaciones

5.7.1 - Work Position

To save a work position:
1º - Press the Zero Position button;
2º - Adjust the backrest to the desired position;
3º - Adjust the seat to the desired position;
4º - Press the Work Position button for 5 seconds. The equipment will emit 2 long beeps;
5º - Press command 1 (Seat Up) while the equipment beeps; The equipment will emit 2 short
beeps to confirm the procedure;
Note: the time to record the working position is only 2 seconds between steps 4 and 5, then when you hear the
first long beep (step 4), quickly press one of the available commands (1 to 3) to record the working position. If
none of the available commands are pressed during this time, the equipment will emit 3 short beeps, canceling
the operation.
6º - Press the Zero Position button.
Repeat the previous steps by replacing the command 1 by the command 2 (Backrest Up) to record the
working position 2 or by the command 3 (Seat Down) to save the working position 3.
To perform a working position:
1º - Press the Work Position button; The equipment will emit a short beep;
2º - Press the command for the desired saved working position (1 to 3); The equipment beeps twice confirming
the operation.
The dental chair moves the backrest and seat simultaneously to the previously saved position and lights
the operating light at the last intensity used.
Note: after pressing the Work Position button, the time for position selection is 4 seconds. If no key is pressed
within this time, the equipment cancels the operation.

5.7.2 - Zero Position

Press the Zero Position button, on the chair base, to automatically adjust the seat to the
lowest position and backrest in the highest position simultaneously, to facilitate patient entry and
exit.

5.7.3 - Articulated and Multi-articulated Headrest (Optional)

To adjust the headrest: turn the knob (1)
counterclockwise, adjust the articulated headrest
(3) or the multi-articulated headrest - optional (4)
in the desired position.
Turn the knob (1) clockwise to lock the
headrest in the set position.
To adjust the height of the headrest: move
the bar (2) until you reach the position. The
headrest bar allows adjustment with up to 17 cm
from the backrest.

5.7.4 - Swivel Armrest (Optional)

To move the swivel armrest: press the trigger (1) and push the armrest
down.
14