Assistant Module (Optional); Operating Light; Evolution Plus; Concept Plus (Optional) - Olsen SPRINT Manual De Operaciones

5.5.1 Assistant Module (Optional)

When the equipment has an assistant module (10), the instruments of the
water unit are transferred to the assistant module, facilitating access for the
operator, through the extension arm.

5.6 - Operating Light

5.6.1 – Evolution Plus
To turn On/Off the operating light: press the operating
light control (1) on the chair base (section 5.3).
To change the light intensity: hold the operating light control button
pressed for more than 2 seconds. Release the button when the operating light
has the desired intensity.

5.6.2 - Concept Plus (Optional)

To activate the operating light: press the
operating light command (1) on the chair
base (section 5.3) to enable sensor (3) and
control lever (2).
To turn On/Off the operating light: pass
the hand in front of the sensor (3)
approximately 5 cm away or turn to left or right
the control lever (2).
To change the light intensity: hold your hand in front of
the sensor (3) or hold the control lever (2) to the left or to the
right until the operating light shows the desired intensity.

5.6.3 - Premium LED (Optional)

To activate the operating light: press the operating light command (1)
on the chair base (section 5.3) to enable sensor (5) and control knob (4).
To turn On/Off the operating light: pass the hand in front of the
sensor (5) approximately 5 cm away or press the control knob (4).
To change the light intensity: hold your hand in front of the sensor (5)
or turn the control knob (4) until the operating light shows the desired
intensity.

5.7 - Dental Chair

To move backrest and seat, press the joystick at the points indicated
(1 to 4) in the image beside or see section 5.3.
1 - Seat Up ( )
2 - Backrest Up ( )
3 - Seat Down ( )
4 - Backrest Down ( )
13