5.4.2 - Straight Arm Adjustment
Straight arm allows 5 manual height adjustment levels.
To lower/raise the arm: holding the arm in the part closest to the
equipment column, pull it firmly upward to disengage it. Adjust the lock
(1) to the desired height and then push the arm down until it locks into
place.
5.4.3 - Articulated Arm
Features 2 articulations between the delivery unit and the working
table and mechanical lock system.
To lower/raise the arm: Release the lock by the handle (2), adjust
the arm to desired height and then lock it again.
Do not move the working table without loosening the
adjustment handle. This may damage the articulating arm
locking system.
5.4.4 – Flex Arm (Optional)
Features 2 articulations (3) and pneumatic lock that are disabled
by activating the pneumatic valve (4), allowing the working table
movement.
Do not move the table upright without disabling the
pneumatic brake. This may damage the flex arm locking
system.
5.5 - Water Unit
1 - Cup Filler Control
2 - Spittoon Bowl Control
3 - Cup Filler
4 - Area for Instruments
5 - Needle Valve
6 - Spittoon Bowl Control with Timer
7 - Cup Filler Control with Timer
To control the flow of water from the cup filler
and the spittoon bowl, the water unit has a needle valve (5).
When the water unit is equipped with timed controls for spittoon bowl (5) and
cup filler (6), these commands are available on the side of the water unit.
The availability of commands and instruments in the water unit and
assistant module may vary according to the customer's order and
available handpieces.
12