Final Installation - Harbor Breeze E-ER56ORB3LKLR Manual Del Usuario

WIRING
4.
IMPORTANT: Using a full range dimmer switch (not
included) to control fan speed will cause a loud
humming noise from fan. To reduce the risk of fire or
electrical shock, do NOT use a full range dimmer
switch to control fan speed. (Fig. 4)

FINAL INSTALLATION

1. Locate two canopy mounting screws (N) on
underside of mounting bracket (C) and remove
canopy mounting screw (N) closest to the open end
of the mounting bracket (C). Partially loosen the
other canopy mounting screw (N). Lift canopy (B) to
mounting bracket (C). Place rounded part of slotted
hole in canopy (B) over loosened canopy mounting
screw (N) in mounting bracket (C) and push up.
Twist canopy (B) to lock. Re-insert canopy mounting
screw (N) that was removed, and then tighten both
canopy mounting screws (N). Slide canopy cover (I)
up to canopy (B), aligning rounded part of slotted
holes in canopy cover (I) with screwheads in bottom
of canopy (B). Turn canopy cover (I) to the right
(clockwise) until it stops. (Fig. 1)
4
Dimmer
Switch
For illustrative purposes only--not
intended to cover all types of controls
1
N
13
3
2
1
Speed
Switch
B
I