Working Area - Gigaset C530 IP Manual Del Usuario

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / web-conf.fm / 25.03.2015
Configuring the phone via the Web configurator
Navigation area
The functions of the menu selected in the menu bar (
are listed in the navigation area.
If you select a function, the associated page containing information
and/or input fields is opened in the working area. The selected
function is highlighted in orange.
If a function is assigned subfunctions, these are listed below the
function as soon as you select the function (in the example
Telephony).
The relevant page for the first subfunction (highlighted in orange)
is displayed in the working area.

Working area

Depending on the function selected in the navigation area,
information or dialog boxes are displayed in the working area that allow you to make or change
your phone settings.
Making changes
Make settings for entry fields, lists or options.
u
There may be restrictions regarding the possible values for a field e.g. the maximum number
of characters, entering special characters or certain value ranges.
u
To open a list, click the
u
There are two kinds of options:
- Checkboxes: You can select one or more options from a list. Active options are indicated
by
the other options in the list does not change. You can deactivate an option by
clicking
- Alternative options (radio buttons). The active option in the list is indicated by
the non-active by
option is deactivated. You can only deactivate an option by activating another option.
Applying changes
As soon as you have made your change on a page, save and activate the new setting on the
phone by selecting Set.
If your entry does not comply with the rules for this field, an appropriate error message is
displayed. You can then repeat the input.
Caution
Changes that have not been saved on your phone are lost if you move to another web page
or the connection to the Web configurator is lost, e.g. due to exceeding the time limit
¢
( page 100).
102
V
button. You can choose between default values.
μ
, non-active options by
μ
.
. You can activate an option by clicking
¢
page 101)
. You can activate an option by clicking . The status of
.
, and
. The previously activated