Gigaset C530 IP Manual Del Usuario página 118

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / web-conf.fm / 25.03.2015
Directory file content (vcf file)
The following data (if available) is written into the vcf file for entry into the directory or
transferred from a vcf file into the handset phonebook:
u
Name
u
First name
u
Number
u
Number (office)
u
Number (mobile)
u
E-mail address
u
Anniversary date (YYYY-MM-DD) and the time of the reminder call (HH:MM) separated by a
"T" (e.g.: 2008-12-24T11:00).
Other information that a vCard may contain is not entered into the handset phonebook.
Example of an entry in vCard format:
BEGIN:VCARD
VERSION:2.1
N:Smith;Anna
TEL;HOME:1234567890
TEL;WORK:0299123456
TEL;CELL:0175987654321
E-MAIL:anna@smith.com
BDAY:2008-12-24T11:00
END:VCARD
Changing the base settings, registering handsets
You can use the Web configurator to:
u
Switch the base to registration mode to register more handsets to the base. This setting
corresponds to pressing and holding the registration/paging key on the front of the base.
u
Activate or deactivate Eco Mode or Eco Mode+. For Eco Mode see page 86.
u
Change the system PIN (
u
Activate and deactivate the LED for the registration/paging key on the front of the base. See
page 3 for the meaning of the LED.
u
Activate or deactivate the display of VoIP status messages on your handset.
The base settings are on the web page
¤
Settings
Rebooting the device or restoring the factory settings
If your phone suddenly does not work as expected, you can restart it. This frequently resolves
problems.
You can also reset all of the settings on the phone to the default settings e.g. if you want to give
your phone to a third participant. This deletes all settings, lists and phonebook entries!
You can restart the device or restore the factory settings via the web page:
¤
Settings
¢
page 51) for your phone.
¤
Management Miscellaneous
¤
Management Reboot & Reset
Configuring the phone via the Web configurator
117