Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / settings.fm / 25.03.2015
Activating/deactivating the information ticker
You can display text information from the Internet that is set for the screensaver Info Services as
a scrolling message in the idle display.
v
Ï
¤
¤
The ticker starts as soon as the telephone changes to idle status. If a message is shown in the idle
display, the information ticker is not displayed.
Setting the colour scheme
Ï
You can set the display to show a dark or a light background.
v
¤
Scheme 2
Setting the display backlight
The display backlight is always activated when the handset is not in the base/charging cradle or
when a key is pressed. Any digit keys pressed appear on the display for pre-dialling.
Ï
You can activate/deactivate the display backlight for idle status:
¤
v
In Charger:
Out of Charger:
¤
Save
Note
The On setting can significantly reduce the standby time of the handset.
Activating/deactivating Auto Answer
When set to Auto Answer, the handset accepts an incoming call as soon as you remove it from
Ï
the charging cradle.
v
¤
Regardless of the Auto Answer setting, the connection ends as soon as you place the handset
back in the charging cradle. Exception: Press and hold c for a further 2 seconds while placing
the handset in the charging cradle.
Changing the handsfree/earpiece volume
You can set the volume of the earpiece and speaker at 5 levels independently of each other.
t
Handset Volume
Or:
Ï
v
¤
r
¤
r
Set earpiece volume.
¤
Set speaker volume.
Setting the volume during a call:
automatically saved after approx. 3 seconds.)
t
If
is assigned to another function:
¤
Options
¤
¤
q Display
OK
OK
¤
¤
¤
¤
OK
Display
OK
¤
Select (Ø = selected)
¤
¤
¤
q Display
OK
¤
r On / Off
¤
r On / Off
¤
¤
q Telephony
OK
¤
¤
q Audio Settings
OK
s
¤
¤
Save
¤
¤
q Volume
¤
¤
OK
¤
¤
q Info Ticker
Edit (
¤
Colour Schemes
OK
¤
¤
q Backlight
OK
¤
¤
¤
OK
Auto Answer
¤
¤
OK
Handset Volume
Scroll to the Speaker: line.
t
r
¤
Select the volume.
Make the setting.
Adjusting the telephone settings
³
= activated)
¤
q Colour Scheme 1 / Colour
OK
³
Change (
= activated).
¤
OK
¤
Save (The setting is
45