Gigaset C530 IP Manual Del Usuario página 57

Gigaset C530 IP / LUG - USA en / A31008-XXXXX-XXXX-X-XX / settings.fm / 25.03.2015
Configuring the system settings
Starting the firmware update manually
v Ï
¤
The phone establishes a connection to the Internet.
Notes
u
The firmware update can take up to six minutes, depending on the quality of your DSL
connection.
u
When updating from the Internet, checks are made to ensure that no newer version of
the firmware exists. If this is not the case, the operation is terminated and a message is
issued to that effect.
Updating firmware automatically
Your phone will check daily whether a newer firmware version is available from the Internet on
the configuration server. If firmware updates are available, the message New firmware available
is displayed in the idle display of the handset.
¤
Press the display key Yes to confirm the prompt.
The firmware will be downloaded to your phone.
Note
If the telephone is not connected to the Internet at the time when the check for new firm-
ware is to be performed (e.g. because the router is deactivated), the check is performed as
soon as the phone is reconnected to the Internet.
You can deactivate the automatic version check via the Web configurator.
Restarting the base
v Ï
¤ ¤
This is restarted. This process takes about 20 seconds.
Checking the base MAC address
Depending on your network configuration, you may have to enter your base MAC address in
your router's access control list, for example. You can check the MAC address on the handset.
v *#Q5# 2 Q
¤
Returning to idle status:
56
¤ ¤ ¤
q System q Update Firmware
OK
¤ q System ¤
OK OK
¤
Back
¤
OK
¤
Start the firmware update with Yes.
¤ q Base Restart ¤
OK
The MAC address is displayed.
¤ ¤
Enter system PIN. OK