Dreame Robot Vacuum-Mop F9 Manual De Instrucciones página 13

How to Use
9. Use the mopping function
It is recommended that all floors are vacuumed at least three times before
the first mopping session to achieve better cleaning effect.
① Install the mop pad: Dampen the mop pad and wring out excess water.
Slide the pad all the way into the slot of the water tank until it is securely in
place.
② Fill the water tank: Open the water tank lid, fill the tank with water, then
securely close the lid.
Note: Do not use non-designated detergents or disinfectants.
③ Install the mopping module: Align the mopping module as indicated by
the arrow, then slide it into the back of the vacuum until it clicks into place.
Press the button or use Mi Home/Xiaomi Home app to start cleaning.
Note:
• Only use the mopping module when someone is at home.
• To prevent the vacuum-mop from entering carpeted areas, objects may be used.
• Use the app to adjust the water flow as required.
④ Press the two side clips inwards and slide the water tank backwards to
separate it from the robot.
Note: When the vacuum-mop is charging or not in use, remove the mopping module,
pour out all remaining water in the tank, and clean the mop pad to prevent mildew or
lingering odors.
11