Dreame Robot Vacuum-Mop F9 Manual De Instrucciones página 15

Routine Maintenance
Mopping Module
1. Press the side clips of the mopping module inward and pull to remove
the module.Pull the mop pad off of the mopping module to remove it.
2. Empty the remaining water in the water tank and keep it dry naturally.
3. Clean and dry the mop pad.
Note:
• Remove the pad from the mopping module before cleaning it, and make sure dirty
water does not flow back into the water outlet to avoid clogging.
• Do not press too hard on the mop pad, as this can hinder its performance.
• Pad should be cleaned before each use. It is recommended to change the mop pad
every 3 to 6 months.
4. If slow water flow occurs, or the volume is not well-distributed, please
clean the air hole in the cover of the water tank.
12
11 1
10 2
24 hrs
9
8 4
7 5
6
13