Luminance Brands Kathy Ireland Home CF985LBS00 El Manual Del Propietario página 15

6.8
If using the No-Light Cover, skip this Section and go
to Section 7.
Remove one of the three #6-32 x 3/8" Truss Head
Screw with Lockwasher from the Lower Housing
(Figure 25). Retain the Screw for future installation.
Loosen the other two Screws several turns.
Carefully tuck all the Wires and Connectors into
the Lower Housing and place the LED Light Fixture
Assembly onto the Lower Housing.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the lower housing and the LED light fixture
assembly.
6.9
Engage the Fan Motor 2-Pin Wire Connector into the
2-pin Wire Connector of the LED Light Fixture Assembly
(Figure 26).
The connection is complete when you hear a soft click.
6. Final Assembly
(Continued)
LOOSEN TWO #6-32 x 3/8"
TRUSS HEAD SCREWS
WITH LOCKWASHERS
Figure 25
FAN MOTOR
2-PIN WIRE CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY
2-PIN WIRE CONNECTOR
LED LIGHT FIXTURE
ASSEMBLY
Figure 26
Please contact 1-800-777-4440 for further assistance
15
LOWER
HOUSING
REMOVE ONE #6-32 x 3/8"
TRUSS HEAD SCREW WITH
LOCKWASHER
luminancebrands.com
ETL Model No.: CF985L