Final Assembly - Luminance Brands Kathy Ireland Home DUO CF560BS00 El Manual Del Propietario

6.1
Remove and retain the two opposite 10-24 x 3/8" Pan
Head Ceiling Cover Screws from the Ceiling Mounting
Plate (Figure 13A) .
Loosen the remaining two opposite 10-24 x 3/8" Pan
Head Ceiling Cover Screws from the Ceiling Mounting
Plate (Figure 13A) .
Unhook the Fan Motor Assembly from the Ceiling
Mounting Plate Hook and lift the Fan Motor Assembly
up to the Ceiling Mounting Plate .
Align the two Fan Motor Assembly Slots with the two
Screw Heads previously loosened (Figure 13B) .
Rotate the Fan Motor Assembly clockwise to engage
the Screw heads into the two Fan Motor Assembly Slots
(Figure 13B) .
NOTE: For correct alignment: place the Ceiling
Mounting Plate Hook into the opening of the
Receiver, located in the Fan Motor Assembly.
Reinstall the two previously removed 10-24 x 3/8"
Pan Head Ceiling Cover Screws (Figure 13B) .
Completely tighten all four 10-24 x 3/8" Pan Head
Ceiling Cover Screws to secure the Fan Motor
Assembly to the Ceiling Mounting Plate (Figure 13B) .
A spare 10-24 x 3/8" Pan Head Ceiling Cover Screw is
supplied in parts bag, if needed .
6.2
Position the Ceiling Trim Ring over each of the four
protruding 10-24 x 3/8" Screw Heads and rotate the
Ceiling Trim Ring clockwise to secure (Figure 14) .
WIRES REMOVED FOR CLARITY
RETIGHTEN TWO OPPOSITE
10-24 x 3/8" PAN HEAD SCREWS
REINSTALL TWO OPPOSITE
10-24 x 3/8" PAN HEAD SCREWS
Figure 13B
12
CEILING
MOUNTING
PLATE
FAN MOTOR
ASSEMBLY
U.L. Model No.: CF560