Publicidad
3. Coding with licence protection:
The additional warning lamp (C2) for checking the operation of the trailer indicators is not
fitted to the vehicle. In addition, the trailer lights (with the exception of the fog light and
reversing light) are monitored using the light failure monitoring element in the multi-function
After fitting the electric installation kit, an online coding or a documentation update must be
••
Start the ODIS diagnostics tester
•
Start the "Diagnostics" function
•
Select menu item "Test plan"
•
Open selection window "Select my own test plan"
•
Select sub item "SW version management"
•
Select sub-item "Special measures"
•
Select sub-item "0069 trailer function"
•
Select sub-item "0069 Retrofit"
•
Transfer of the trailer function by the button confirm "Append to the test plan"
•
Highlight the selected trailer function in the main window
•
Confirm the function with the button "Perform Test Plan"
•
Confirm the displayed text window with "OK"
•
Choose via button 4 "Execute retrofit solutions with license protection"
•
Input and confirm the codes from the licence book into the input windows
(1)
Activation code
(2)
Activation number
(3)
PIN Code
•
Follow the instructions provided by the diagnostics tester
After a positive execution of the complete measure is a "CAN Bus Rest" (ignition off as
well as all doors and flaps completely closed and the vehicle locked) for at least 5
minutes to be performed. Afterwards all fault memories can be finally checked and
1. It must be ensured that the latest version of
the vehicle test.
2. The request for the vehicle configuration (licence code) only occurs once if the procedure
and test operation are carried out without any errors.
3. The licence measure is assigned to the vehicle upon first use and cannot be used for other
vehicles.
4. If repairs must be made on the designated vehicle, the licence measure may need to be
repeated.
5. Unprompted multiple call-ups generate error messages and have no effect on the
configuration.
25.01.2019c760.055.204.A
NOTE:
display.
performed using ODIS as follows:
deleted if necessary.
WARNING NOTES:
ODIS service
is used on the workshop tester for
15 / 112
Publicidad
