Luminance Brands Kathy Ireland Home PENBROOKE SELECT ECO CF5200AP00 El Manual Del Propietario página 8

3. Ceiling Fan Assembly
3.9
Carefully turn the partially assembled Ceiling Fan
upside down, place the Ceiling Fan onto the two carton
styrofoam pieces, in preparation for final assembly
(Figure 9) .
Remove each of the Ten Spacer Screws and Five
Rubber Shipping Spacers from the Motor Hub before
installation of Blade Assemblies (Figure 9) .
Discard the Five Rubber Shipping Spacers and Ten
Spacer Screws .
3.10
NOTE: Your ceiling fan will operate with the
following Blade Select Blades (Sold Separately):
B77, B78, B79, B90, B91, B100, B101, G44, G54, &
G60.
Mount the Fan Blade (sold separately) using the Four
#10-24 x 12mm Round Head Screws and Flat Washers
(supplied in parts bag) to secure Flange to Blade
(Figure 10) .
Repeat for the remaining Four Blades .
Make sure all Screws are tighten securely in the Fan
Blade and Flange .
NOTE: Some accessory blades are supplied with
shorter screws. These shorter screws MUST be
used to assemble the blades to flanges.
(Continued)
PARTIALLY
ASSEMBLED
CEILING FAN
STYROFOAM
PIECES
Figure 9
#10-24 x 12mm
ROUND HEAD SCREW
(4 per blade/flange)
FLAT WASHER
(4 per blade/flange)
BLADE FLANGE
Figure 10
8
REMOVE & DISCARD
5 RUBBER SHIPPING
SPACERS & 10 SCREWS
FAN BLADE
(sold
separately)
ETL Model No.: CF5200