WARNING
!
Do not install or use fan if any part is damaged or
missing. Call Toll-Free:
1-800-777-4440
WARNING
!
This product is designed to use only those parts
supplied with this product and/or any accessories
designated specifically for use with this product
by Luminance Brands. Substitution of parts or
accessories not designated for use with this product
by Luminance Brands could result in personal injury
or property damage.
1.1
Open carton containing Fan . Remove top half of
styrofoam unit . Remove parts and check to see that you
have received the following parts:
NOTE: If you are uncertain of part description, refer
to exploded view illustration.
HARDWARE CONTENTS
Part
Description
1
Threaded Studs, #8-32 x 1-1/4"
2
Knurled Knobs, #8-32
3
Lockwashers, External Tooth #8
4
Wire Connectors
5
Clevis Pin
6
Hairpin Clip
7
#10-24 x 12mm Washer Head Blade Screws
8
16mm Flat Washers
9
#8-32 x 12mm Flat Head Screw (spare)
10
1/4-20 x 14mm Pan Head Screw (spare)
11
6mm Lockwasher (spare)
12
Flange Gasket (spare)
13
Blade Balance Kit
1
2
3
4
5
1. Unpacking Instructions
Quantity
2
2
2
3
1
1
21
21
1
1
1
1
1
6
9
10
7
11
12
8
13
PACKAGE CONTENTS
Part
Description
A
Fan Motor Assembly
B
Ceiling Cover
C
Coupler Cover
D
Flange Sets
E
Hanger Bracket
F
Hanger Ball/Downrod Assembly
G
Switch Housing
H
Wall Control w/Switch Covers (transmitter)
I
Receiver Control
NOTE: Place the parts from the loose parts bags
in a small container to keep them from being lost.
If any parts are missing, contact your local
retailer or catalog outlet for replacement before
proceeding.
1.2
Remove the Fan Assembly from the protective
plastic bag . Place the Fan Assembly into the upper
foam pad with the bottom of the Motor facing up .
The upper foam pad serves as a holder for the Fan
during the first stages of assembly .
Please contact 1-800-777-4440 for further assistance
3
Quantity
1
1
1
5
1
1
1
1
1
E
I
A
F
B
G
C
H
D
luminancebrands.com
ETL Model No.: CF788