Nogueira FTN-1900 Manual De Instrucciones página 186

4. Preparation
4.2.5- Coupling the harvester in the back position
The harvester can harvest both in the side and in the rear position (ideal for
clearance opening). To place it in the rear position, observe the following
instructions:
Remove the cardan shaft (N).
1.
Remove the bolt and nut (M);
2.
Move the gearbox (A) to the position
3.
shown in the figure beside;
46
SIDE COUPLING
Instructions Manual
(clearance opening)
REAR POSITION
M
A
N