5. Operation
5.8- Disconnecting hoses
Before disconnecting the hydraulic hoses
1.
from the tractor valves, it is necessary to
relieve the system pressure. To do this, turn
off the tractor and then repeatedly push
the levers, easing the system.
With the control levers in the neutral
2.
position, pull the hoses quickly: the
disconnection will occur with minimum
oil loss.
Then, reinsert all the protective caps (A)
3.
into the hose couplings and the tractor
valves.
5.9- Uncoupling the machine from the tractor
Choose a flat location to uncouple the machine from the tractor.
Be aware when performing this procedure there is a risk of personal injury.
Turn off the power take off;
Park the machine on a level and sturdy ground;
Engage the tractor's parking brake;
Lower the machine to the ground;
Turn off the tractor engine;
Disconnect the hydraulic hoses (as instructed in the previous item);
Remove the cardan shaft;
Disengage the tractor machine.
86
A
Instructions Manual