1- Outlet Chute In Working Position - Nogueira FTN-1900 Manual De Instrucciones

4. Preparation
4.2.7- Outlet chute in working position
Remove the counter pins (G) and release
1.
the two arms (F);
Secure the arms (F) to the chute's pivot
2.
pin (E);
Place the two counter pins on the pin (E);
3.
Activate the hydraulic cylinder and raise
4.
the chute completely;
Attach the tensioner (C) to the chute,
5.
using the pin (D);
Tighten the tensioner (C) and the jam
6.
nut (B).
50
G
E
Instructions Manual
F
F
D
C
B