Hydraulic Outlet Chute - Nogueira FTN-1900 Manual De Instrucciones

4.7- Hydraulic outlet chute

The harvester leaves the factory equipped with
a hydraulically controlled outlet chute. The
direction of the deflector and the movements
to raise/lower the chute are performed by
hydraulic cylinders. The turning movement is
performed by a hydraulic motor.
NOTE!
Connect the hydraulic cylinder hose to
a remote control valve on the tractor.
The hydraulic flow valve controls the
flow of the oil and, consequently, the
speed at which the hydraulic cylinder
extends and returns. It is important to
regulate the opening of this valve in
order to obtain a soft movement of the
cylinder, without making the machine
bounce. The optimal setting depends
on the flow rate of the tractor's
hydraulic system used.
It is recommended some practical tests
to be performed, so that you can find
the best adjustment: open the valve
a bit, activate the cylinder and observe
the movement. If necessary, repeat
the procedure by changing the valve
opening.
Hydraulic Cylinder
moves the deflector.
Hydraulic Motor
turns the chute
Instructions Manual
4. Preparation
Hydraulic Cylinder
raises and lowers the
chute
VALVE
59