1- Outlet Chute In Transport Position - Nogueira FTN-1900 Manual De Instrucciones

4.2.6- Outlet chute in transport position
Lower the outlet chute every time you
transport the harvester coupled to the
tractor. This procedure prevents damage
and accidents from occurring in the event of
contact with trees, the power grid, etc. To
lower the outlet chute, proceed as follows:
CAUTION!
Do not carry the machine with the chute
lifted. Any contact with the power grid
can result in an electric shock and/or
electrocution accident.
Turn the chute to the front of the machine;
1.
Loosen the jam nut (B) and the tensioner
2.
(C). Remove the counter pin and the pin
(D).
Activate the hydraulic cylinder and lower
3.
the chute completely;
Remove the counter pin and the pin (E)
4.
and release the two tensioning arms (F).
Replace the counter pins (E);
Fit the tensioning arms (F) to the two pins
5.
of the lifting tube (see figure below).
Secure the arms (F) with the counter pins
6.
(G).
G
E
Instructions Manual
4. Preparation
D
F
C
B
49