Nogueira FTN-1900 Manual De Instrucciones página 244

6. Maintenance
Open the platform again and tighten the
9.
3 bolts (A).
After adjusting, rotate the rotor manually
by turning one full turn. Observe carefully
if there is no contact between the knives
and the counter knife. If necessary, repeat
the adjustment, observing the maximum
clearance of 0.5 mm between the knives
and the counter knife.
Operate the machine with a friction of
knives with counter knife will damage the
machine and could result in the release of
fragments that could hit people and cause
an accident involving personal injury.
The use of PPE (Personal Protective
Equipment) is mandatory during operation,
maintenance and adjustment of the
machine. Wear suitable gloves and goggles.
Take special care when handling knives and
counter knife, these components have
sharp areas that can cause injury if handled
without proper protection and care.
Adjust the counter-knives of the two rotors.
104
ATTENTION!
Instructions Manual
A