Removing The Side Panel; Preliminary Controls - SWM SM 125 R 2020 Guía Rápida

RIMOZIONE DEI PANNELLI LATERALI
REMOVING THE SIDE PANELS
For some maintenance operations, one or both
the side panels need to be removed.
To remove the left- and right-hand side panels,
operate as follows:
- Unscrew the screw (2).
- Lift the panel (1) releasing it from the upper
hooks
2

PRELIMINARY CONTROLS

Engine-transmission oil level
Keeping the motorbike level and upright,
check the oil level through the inspection (1)
window on the right crankcase. Check that the
level is in the middle of the sight glass "A"
between the MIN and MAX notch.
To fill up, remove the filler cap (2).
1
1
Fuel level
Check the level in the tank, top up as needed
2
Electrical system
MAX
Start the motor, as instructed in the section
"Instructions for using the motorcycle", and
"A"
check that the lights, brake light, indicators,
MIN
warning lights on the dashboard and horn all
work correctly.
Tyre pressure
Check the tyre pressure, which must
correspond to the pressure values provided in
the section "Technical data".
OUTLAW 125
7 / EN