Combined Braking Control - SWM SM 125 R 2020 Guía Rápida

R.H. HANDLEBAR SWITCH
The right-hand switch features the following
controls:
1) Engine start button
Pressing the button (1) with the key in
position and the switch (2) in position, the
engine starts.
2) Engine KILL SWITCH.
Flicked to position, disables engine starting
and running.
Flicked to position, enables engine starting
and running.
2
1
L.H. HANDLEBAR SWITCH
The left-hand switch features the following
controls:
1) High beam flasher (self-cancelling)
2) High beam
Low beam
3) Left-hand turning indicators
Right-hand turning indicators
To deactivate the turning indicators, press the
control lever after it is returned to the Centre.
4) Warning horn
1
4

COMBINED BRAKING CONTROL

The combined braking control pedal (1) is
located in the motorcycle right side. A stop
switch, when braking, causes the taillight lamp
ignition.
NOTE
If you pull the lever (2) you'll brake using the
front brake; if you press the pedal (1) a
combined braking, for which the system will
divide the braking, both on the front brake and
on the rear one, will occur.
1
2
3
2
OUTLAW 125
13 / EN