ICS 680ES Manual De Mantenimiento página 28

8. STARTER
8. This section covers the removal of the starter cover, replacement of the
starter rope, and replacement of the recoil spring.
8.1
Remove starter cover screws (4).
8.2
Remove starter cover assembly from
the power cutter.
8.3
Remove starter cord shield screws.
8.4
Relieve spring tension.
A. Pull 4-6" (10-15 cm) of rope out.
B. Line rope up with notch on pulley.
C. Slowly rotate pulley counter-
clockwise until spring pressure is
released. Use thumb as brake.
8.5
Remove starter pulley screw and
washer.
NOTE: Hold starter cover firmly.
28
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020
680ES SERVICE MANUAL