Flywheel - ICS 680ES Manual De Mantenimiento

680ES SERVICE MANUAL
16. This section covers the removal, inspection, and installation of the
flywheel. Removal of the starter and spark plug is requried. Refer to
sections 6 and 8 if necessary.
16.1
Insert piston stop.
16.2
Remove flywheel nut, wave washer, and
plain washer.
16.3
Screw on flywheel removal tool finger
tight. Unscrew tool 1 1/2 turns leaving
approximately 1/8 inch (5 mm) space
between tool and flywheel.
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020

16. FLYWHEEL

55