ICS 680ES Manual De Mantenimiento página 62

20. CRANKCASE
20.4
Remove the flywheel side crankcase —
tap crankshaft with plastic mallet.
A. Suspend above work surface.
B. Tap with mallet.
NOTE: A nut should always be placed
on a threaded shaft when pounding or
pressing on it.
20.5
Remove the flywheel side crankcase seal
with 1/2" (13 mm) socket.
20.6
Heat the clutch side crankcase with heat
gun to 150°F (65.5°) C.
62
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020
680ES SERVICE MANUAL