ICS 680ES Manual De Mantenimiento página 56

16. FLYWHEEL
680ES SERVICE MANUAL
16.4
Using pliers, hold power cutter up by
magnet counterweight.
16.5
Strike flywheel removal tool with a ball
peen hammer. The flywheel should
release from crankshaft.
16.6
Inspect and clean flywheel. Replace if any
of the fins are broken.
16.7
Inspect woodruff key.
16.8
Install flywheel, plain washer, wave washer,
and flywheel nut.
A. Torque nut to 260 in-lbs (29.3 Nm.)
56
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020