ICS 680ES Manual De Mantenimiento página 37

680ES SERVICE MANUAL
10.13
Install cylinder cover.
A. Pull spark plug lead into slot in cylinder
cover.
B. Make sure throttle rod assembly is
seated between crankcase and cylinder
cover.
C. Push the cylinder cover down on the
crankcase, guide intake manifold into
cylinder cover.
D. Install the cylinder cover screws. Use
Loctite 242. Torque to 35 in-lbs. (4.0 Nm).
®
E. Install fuel tank breather and clamp.
10.14
Install air filter mount.
A. Guide carburetor compensating tube
through air filter mount. Make sure manifold
sits flat over lip on cylinder cover.
B. Install air filter mount screws (3) using
Loctite 242.
®
C. Torque to 43 in-lbs (4.9 Nm.)
10.15
Install air filters and cover.
A. Install pre-filter.
B. Install clean air filter.
C. Install air filter flange and tighten.
D. Install air filter cover and tighten.
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020
10. CYLINDER COVER
B
37