ICS 680ES Manual De Mantenimiento página 49

680ES SERVICE MANUAL
13.23
Install 4 cylinder screws and washers.
A. Use Loctite 242.
®
B. Torque bolts to 95 in-lbs. (10.7 Nm).
13.24
Install rear manifold.
A. Lubricate rear manifold with ICS
2-stroke oil.
B. Push rear manifold onto cylinder
intake.
C. Align rear manifold seam with cylinder
and crankcase seam.
13.25Install rear manifold clamp.
A. Torque to 11 in-lbs. (1.2 Nm).
Do not over tighten, damage to rear
manifold may cause engine damage.
© 2020 ICS- Blount Inc Specifications and pricing are subject to change without notice. P/N 598000 REV01162020
®
13. CYLINDER & PISTON
49