7. O P E R AT I N G T H E V O L C A N O H Y B R I D
7.7. Tube Kit
7.7.1. Application
Before using the Tube, switch
off the pump by pressing the
touch button pump (AIR).
Instead of the Valve Balloon, place
the Tube with Tube Flexer directly on
the preheated Filling Chamber filled
with vaporization material. Then turn
the Filling Chamber clockwise until it
stops. Slowly inhale the vapor from the
Tube with the Mouthpiece attached
for a few seconds.
Inhale slowly for a few seconds from the
Tube with the Mouthpiece attached
To avoid residual moisture
deposition in the Tube, and to
minimize the risk of possible
contamination, do not blow
into the Tube.
Caution! Hot surface!
Do not touch any compo-
nents of the Filling Chamber
(except at the textured grip)
until they have cooled down.
Do not leave the Filling
Chamber on the hot air outlet of the
VOLCANO HYBRID - except when us-
ing the Tube Kit - as long as its heater
is switched on.
Caution! Hot surface!
Do not leave Filling Chamber on
VOLCANO HYBRID
7.7.2. Reusability, Cleaning and Care
The Tube is maintenance-free and
must be replaced with a new Tube ev-
ery two weeks for hygienic reasons. To
avoid possible transmission of patho-
gens, the Tube with Mouthpiece may
only be used by one person and not
together by several persons.
86