Johnson JTP9C Manual De Usuario página 56

DESCRIPTION OF THE DISPLAY SCREEN
● The unit features a self-evaporating system, and under normal operating conditions, should
not require having the tank emptied.
● Under prolonged/high humidity conditions, you may be required to empty the tank.
● When the tank is full, the appliance shuts down and "
The tank cap must be removed and emptied. Let all of the water in basin drain out. When all of
the water has been drained, the air conditioner will start up again.
NOTE:
- When operating in very cold rooms, the appliance will defrost automatically, interrupting normal
operation. " "appears on the display. During this operation, it is normal for the air conditioner
to make noises as it's defrosting.
- In this mode, you may have to wait for a few minutes before the appliance starts giving out hot
air.
- In this mode, the fan may operate for short periods even though the set temperature has
already been reached.
FAN mode
When using the appliance in this mode, the air hose does not need to be attached.
Press the button until the "Fan" symbol illuminates.
●
Select the required fan speed by pressing the
●
Three speeds are available: High / Medium / Low.
The screen will display "
speed.
V.1
button.
" for high speed, " " for medium speed, "
17
" (full tank) appears on the display.
" for low