Inserting Or Replacing The Batteries - Johnson JTP9C Manual De Usuario

REMOTE CONTROL MANUAL

INSERTING OR REPLACING THE BATTERIES

● Remove the cover on the rear of the remote
control
● Insert two "AAA" 1.5V batteries in the correct
position (see instructions inside the battery
compartment)
NOTE:
√ If the remote control unit is replaced or disposed
of, the batteries must be removed and discarded in
accordance with current legislation as they are harmful to the environment.
√ Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc) or
rechargeable (nickel-cadmium) batteries.
√ Batteries may explode or leak if exposed to open flames. Dispose of batteries
accordingly.
√ If the remote control is not being used for extended periods of time (winter storage),
remove the batteries and store in a cool, dry location.
COOL mode
Ideal for hot, muggy weather when you need to cooling and dehumidify the room.
To set this mode correctly:
● Press the button a number of times until the "Cool" symbol appears.
● Select the target temperature 64℉-90℉(18℃-32℃) by pressing the
button until the corresponding value is displayed.
● Select the required fan speed by pressing the
Four speed settings are available: High/Med/Low/Auto.
The most suitable temperature for the room during the summer varies from 70℉ to
76℉
(21℃ to 24℃). The fan speed difference is more noticeable when the appliance
is under FAN mode but may not be noticeable under COOL mode.
HEAT mode *
" * "means only the heat pump model has this function.
● Press the button a number of times until the "Heat" symbol appears.
● Select the target temperature 55℉-81℉(13℃-27℃) by pressing,the
until the corresponding value is displayed.
● Select the required fan speed by pressing the
Four speed settings are available: High/Med/Low/Auto.
V.1
button.
button.
23
or
or button