Johnson JTP9C Manual De Usuario página 64

REMOTE CONTROL MANUAL
AUTO mode
The appliance chooses automatically whether to operate in cool, fan or heat mode
(certain models have heat mode) .
● Press the button a number of times until the screen of the unit display below:
It is AUTO mode when the display will be running circulating.
● Select the required fan speed by pressing the
Four speed settings are available: High / Medium / Low / Auto.
If the appliance is a cooling-only model, the unit operates in Fan mode when the room
temperature is below 73℉ (23℃) and in Cool mode when the room temperatures is
above 73℉(23℃).
If the unit is a heat-cool model, the unit operates in Heat mode when the room
temperature is 68℉(20℃). and in Fan mode when the room temperature is from 68℉
(20℃) to 73℉(23℃). and in Cool mode when the room temperature is above 73℉(23℃).
SWING function
This function is useful for select the up/down swing of air delivery.
To set this function correctly:
● Select the operating mode (Cool, Dry, Fan) as described above.
● Press the button and the deflector will stop at different positions or it will swing
continuously.
SLEEP function
This function is useful at night as it gradually reduces operation of the appliance.
To set this function correctly:
● Select the cool or heat mode as described above.
● Press the button.
When you choose the sleep function, the screen's brightness will be reduced and the
fan speed will run on low.
V.1
button.
25