Johnson JTP9C Manual De Usuario página 57

DESCRIPTION OF THE DISPLAY SCREEN
DRY mode (dehumidifier only mode)
Ideal to reduce room humidity (spring and autumn, damp rooms, rainy periods, etc).
In dry mode, the appliance should be installed in the same way as the cool mode, with
the air exhaust hose attached to enable moist/humid air to be vented outside.
To set this mode correctly:
Press the button until the "Dry" symbol illuminates. The screen will display "
●
In this mode, fan speed is selected automatically by the appliance and can not be
●
set manually.
During the DRY mode, you will need a garden hose (sold separately) or drainage
hose to drain the condensate from the unit.
Follow the steps below:
● Unscrew the drain cap of continuous drain outlet (Fig.20).
● Connect one end of the garden hose (sold separately) or drainage hose (not
supplied) to the drain outlet then lead the other end into a drain that is lower than the
unit (Fig.21).
Fig.20
NOTE:
● Condensate may flow out after removing the drain cap if the unit is running in Cool
mode. When you want to remove the garden hose, prepare a drip tray (not supplied)
to collect the condensate from the drain outlet.
● Please be sure that the height of the drain and section of the drain hose should not
be higher than that of the drain outlet, or the continuous drainage may not work
properly (Fig. 22 & Fig. 23).
● During Cool mode, it is recommended to disable continuous drainage by replacing
the drain cap to the drain outlet, to reach the maximum performance.
V.1
Fig.21
18
".
Garden hose or
drainage hose