Safety Instructions; Description; Components; Indoor Station - Extel WEPA 245 BIS R1 Instrucciones De Uso E Instalación

1

SAFETY INSTRUCTIONS

Important :
• Please read the user manual thoroughly before installing or using this product.
• If you install this product for other people, please give the manual or a copy to the end user
Warning :
• The different elements can only be dismantled by an authorised technician. .
Safety instructions :
• To safely use this system, it is essential the fitters, users and technicians follow the safety procedures described
in this manual.
• Specific warnings and caution symbols are indicated on the elements if necessary
2

DESCRIPTION

1 • Interior response unit
2 • Adapter
Introduction
This interphone consists of an interior response unit and an exterior street plate with which communications can
be established with the visitor who has rung.
Two wires are needed for all functions, including ringing, interphone, keeper or electric lock command, and gate
mechanism command.
For proper use, please read this notice thoroughly and keep the Instruction Manual.
3

COMPONENTS

a. Indoor station
1. Loudspeaker for ringing and speaking.
2. Communication indicator (green).
3. Indicator of switching off ring tone and indoor melody.
4. Gate mechanism command (current-less contact on roadside panel terminals
5. Microphone for communication with the street plate.
6. Control of a strike or electrical lock (12 V
7. Communication with the roadside panel, after 1 call or after pressing the key "monitoring"
8. Silence mode or melody selector: the top selector cuts the ringing and exterior sound (the
blinking).
9. Ringer volume adjustment.
10. Monitoring button. For listening to the street.
11. On the back of the response unit, terminals for wire connections.
12. On the back of the response unit, socket for the 15 V
within current NFC 15-100 specifications in France).
b. Roadside panel
1. Loudspeaker: so that the person outside can be heard inside.
2. Call button, when this button is pressed, the bell rings inside.
3. Name display : Using a small screwdriver, remove the name display label's plastic (7) protector.
2GB CFI EXTEL WEPA 245 BIS SER.R1 & WEPA 246 BIS SER.R1 - 11/2010 - V1
(fig. 1)
3 • Street plate
4 • Rain Shield
(fig. 2)
(fig. 3)
output on the terminals
adaptor plug (adaptor to be connected to a unit
).
of the roadside panel).
LED then starts