5.4 VOICE COMMAND
The SRC-System™
PRO
allows you to perform key actions hands-free by simply
using your voice.
The default Voice Command language is English. Other languages are also
available (see section 4 to adjust settings).
Throughout this manual, features which are available via Voice Command are
marked with the
icon.
s
1. With no call in progress, tap
or speak any word loudly to activate VOX
2. Speak a Voice Command from the table below:
Current Mode
Desired Action
"1+8" Intercom Call*
Standby / FM / A2DP
Intercom call with A or B
Start A2DP
Standby
Turn on FM
Turn off FM
FM Radio
Next Station Preset
Previous Station Preset
Stop / Pause A2DP
A2DP Music
Next Track
Previous Track
*see Section 6.1 for details
|
SRCS Pro
12
Voice Command performance may vary based on environmental conditions including
driving speed, helmet type and ambient noise.
For improved performance of the Voice Command feature, minimize wind impact on the
microphone by using the large microphone sponge and closing the visor.
5.5 VOICE CONNECT (VOX)
The SRC-System™
of some key functions.
You can set VOX to either start an intercom call or activate the Voice Command.
Say this:
VOX Activation
<<Buddy Name>>*
Answer a call
"Call Intercom"
"Music ON"
Reject a call
"Radio ON"
VOX Sensitivity
"Radio OFF"
(Default: Medium)
"Next Station"
"Previous Station"
VOX Operation Mode
"Music OFF"
"Next Track"
Enable/Disable VOX
"Previous Track"
(For Intercom/Voice
Command only)
PRO
offers VOX technology for safe and hands-free operation
Speak any word loudly into the microphone
Speak any word loudly into the microphone
Remain silent for about 15 seconds
See section 4 to adjust settings.
High: Use this setting if it is difficult to activate VOX
Low: Use this setting if it is too easy to activate VOX
VOX can be set to activate the Voice Command (default) or to
start an Intercom Call. See section 4 to adjust settings.
+
-
In Standby, press
and
simultaneously for 2 seconds
• Enable: Blue flash for 2 seconds
• Disable: Red flash for 2 seconds