7. PAIRING AND USING A MOBILE PHONE,
GPS OR MP3 PLAYER
To connect your SRC-System™ PRO to a Bluetooth device you must first pair
them. Once paired, they will automatically recognize each other whenever they
are within range (10m / 33ft).
Your unit has two Bluetooth channels for connection to mobile phones, GPS
devices and music players with A2DP.
7.1 PAIRING BLUETOOTH CHANNELS 1 AND 2
1. Make sure Bluetooth is enabled on your phone/GPS/MP3 player.
2. Check the unit is in Standby (single BLUE flash every 3 seconds).
3. To pair Bluetooth Channel 1 – press
RED and BLUE LEDs begin rapidly alternating.
To pair Bluetooth Channel 2 – press
RED and BLUE LEDs begin rapidly alternating.
To pair a GPS, when LEDs begin rapidly alternating, tap
4. Search for Bluetooth devices on your phone/GPS/MP3 player by following the
device's instructions.
5. After a few seconds the device will list "SRCS PRO". Select it.
6. If prompted for a PIN or Passkey, enter 0000 (four zeros).
7. The device will confirm that pairing has succeeded and the LED will begin
flashing Blue, once every 3 seconds.
8. If pairing is not completed within 2 minutes, the unit will return to Standby mode.
IMPORTANT!
• If you have paired 2 different mobile phones directly to your SRC-System™ PRO, you
will need to set one as default for making calls.
• If your GPS supports it, you can pair the second mobile phone directly to the GPS and
then pair the GPS to your SRC-System™ PRO, and so connect both mobile phones and
the GPS to your SRC-System™ PRO.
+
for at least 5 seconds until the
-
for at least 5 seconds until the
.
+
NOTES:
• Not all Bluetooth mobile phones can broadcast Bluetooth Stereo music (A2DP), even if
the phone has an MP3 player function. Consult your mobile phone's User Manual for
more information.
• Not all Bluetooth GPS devices allow connection to Bluetooth audio devices. Consult your
GPS User Manual for more information.
µ
• After pairing, you may need to tap
to connect.
MP3 player
Up to 1 km Bike-to-Bike
Intercom Range*
Built-in
FM radio
GPS
Mobile phone
& A2DP connectivity
|
SRCS Pro
17