Important - SCHUBERTH SRC SYSTEM PRO Guía De Usario

3. Enter Intercom Pairing mode on the second unit following its user manual.
Both units will now be in Intercom Pairing mode.
4. After a few seconds, both units will show a solid LED for 2 seconds, indicating that
they are paired and ready to use.
5. If Pairing is not completed within two minutes, the units will return to Standby
mode.
6.2b CALLING INTERCOM CHANNELS "A" AND "B"
There are two ways to start an intercom call with Channels "A" and "B"
OPTION 1: Voice Connect (VOX)
Speak any word loudly into the microphone. When you hear the Voice Command
tone, say "Call Intercom" to start an intercom call with "A" and/or "B" (subject to
who is present)
VOX Intercom call with only "A" or "B" will end automatically after 30 seconds of
silence.
☛
OPTION 2: Manual Mode
Use this to start an Intercom call with either:
• Channel "A": Tap v
• Channel "B": Double-tap
v
To end a call tap v .
If you are already in an Intercom call with "A" or "B", tap
rider ("A" or "B").
THREE-WAY INTERCOM
Pairing
Rider "1" is paired to Rider "2" and also to Rider "3".
1. Rider 1 pairs to Rider 2 using Channel "A" (see 6.2a).
2. Rider 1 pairs to Rider 3 using Channel "B" (see 6.2a).
IMPORTANT: Three-Way Conference Mode Considerations
During a 3-Way Intercom Conference call with 2 other participants, Rider 1 will not be
able to receive mobile phone calls or GPS navigation instructions as long as the call is in
progress.
twice to add a third
v
Rider 2
Rider 1
Rider 3
|
SRCS Pro
15