Click-To-Link (Ctl) Intercom; Busy Signal; Receiving Intercom Calls - SCHUBERTH SRC SYSTEM PRO Guía De Usario

Ocultar thumbs Ver también para SRC SYSTEM PRO:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FOUR-WAY INTERCOM
Pairing
1. Pair Rider 1 to Passenger 2 using Channel "A" (see 6.2a).
2. Pair Rider 3 to Passenger 4 using Channel "A" (see 6.2a).
3. Pair Passenger 2 to Passenger 4 using Channel "B" (see 6.2a).
In this configuration the two passengers (numbered 2 and 4) are each using
two Bluetooth connections:
Calling
1. Make sure all four units are in Standby.
2. Passenger 2 should double-tap
v
Wait until audio is heard on both units.
3. Rider 1 should tap
to call Passenger 2.
v
4. Rider 3 should tap
v
to call Passenger 4.
IMPORTANT: Four-Way Conference Mode Considerations
During a 4-Way Intercom call, the two passengers who maintain two active connections will not be
able to receive mobile phone calls or GPS instructions as long as the conference call is in progress.
|
SRCS Pro
16
to call Passenger 4.

6.3 CLICK-TO-LINK (CTL) INTERCOM

Click-to-Link is a spontaneous, "social" feature of your SRC-System™ PRO.
You can instantly initiate 1-on-1 intercom calls with other riders near
you, without being paired. Think of it as a private channel that you can
set up on-the-go with other riders that you see along the way.
Click-to-Link can be disabled effectively blocking any attempt by a third party to
send a CTL request to you.
Start a CTL call request
v
Tap
(search lasts up to 10 sec.)
End a CTL call /
v
Tap
Cancel a CTL call request
When hearing the CTL ringtone:
Accept a CTL call
v
Tap
While hearing the CTL ringtone:
Reject a CTL call
Remain silent until the ring tone stops or press
two seconds
Enable / Disable CTL
Via the Settings Menu, Cardo Community and the
(Enabled by default)
Cardo Smartset App
If other riders are nearby, your next Click-to-Link call may randomly connect to
any of them.

6.4 BUSY SIGNAL

When attempting to establish an Intercom call with another unit that is already
busy, a "busy" signal will be heard. The SRC-System™ Pro is busy while on a phone
call, intercom call with Channels "A" and "B", "1+8" intercom call or CTL call.

6.5 RECEIVING INTERCOM CALLS

If a paired unit tries calling you via Intercom, the call will begin almost instantly.
three times
or say any word loudly to answer by VOX
v
for

Publicidad

Tabla de contenido
loading

Tabla de contenido